ASC has an engineered
solution for maintaining sound isolation while running your cables
through the wall. This product is great for recording studios or
home theaters, or any situation where a soundproofed room needs
to stay soundproofed. This is a kit that’s easily installed
no matter how thick your wall is. As long as you can cut a 3.5"
x 9.5" hole on both sides of your wall, the ASC Cable Pass
Through is for you. We’ve also incorporated our exclusive
WallDamp into the design to help damp any low frequency vibration
that may try to escape from your room.
Wall Section Top View
How
It Works
The Cable Pass Through can handle cables up to 3/4"
in diameter. There are two specially designed doors, one for each
side of the wall, which seal the room and stop sound leakage. The
door units use memory foam and WallDamp, as well as mass to absorb
vibration and sound.
To
use, just pass your cables through the wall, remembering of course
to open the doors first. When everything is in place the way you
want it, the doors are closed and the thumbscrews tightened. This
compresses the memory foam against the cables, providing an airtight
seal around them.
The best part of the system is that when you're
done, or you need to change cables, just loosen the thumbscrews,
open the doors, and go to it. The
memory foam adjusts to the new cable configuration in just a few
minutes, and you are in soundproof heaven.
Each ASC Cable Pass Through Kit includes two door
units, one for each side of the wall. The cost is $427
per kit.
To
use, just pass your cables through the wall, remembering of course
to open the doors first. When everything is in place the way you
want it, the doors are closed and the thumbscrews tightened. This
compresses the memory foam against the cables, providing an airtight
seal around them.
The
memory foam adjusts to the new cable configuration in just a few
minutes, and you are in soundproof heaven.